Mannings use the highest quality materials available in the construction of our Flexible Ceramic Pad (FCP) heating elements. These materials make the heating elements ighly durable, which extends the usable life of Mannings heating elements beyond that normally expected. This
extended life, high durability and reliability combine to save you money by Reducing reworks and lost time due to heating element failures. • Reducing your annual costs for replacing or repairing failed or damaged heating elements
high grade sintered alumina ceramic beads, Nickel-Chrome core wire and Nickel cold tail wire.
The construction allows the heating element to be flexible and provides high heat transfer efficiency.
Mannings insist on using high quality, ceramic beads, with a high resistance to thermal and physical shock, in the construction of FCP ceramic heating elements.
These beads are supplied to Mannings by one of the leading, ISO 9002 accredited, specialist ceramic manufacturers in the ceramic industry.
The cold tails of Mannings ceramic heating elements are butt welded to the heater core wire which eliminates the cold tail/core wire junction failures often seen with low quality heaters which use steel ferrules.
By selection, from the extensive range of Mannings FCP heating elements, any pipe size or pipe configuration can be covered so that the correct amount of heating power can be applied to successfully heat treat the pipe weld or other fabrication.
Mannings FCP heating elements are manufactured with a range of power ratings for use with a selection of standard voltages.
If you require any special heating element configuration, voltage or power rating, Mannings will use their heat treatment engineering expertise to provide you with a heating element custom built to meet your exact needs.
Mannings FCP heating elements can, if handled correctly, be used approximately fifty times at temperatures up to 1050ºC (1922ºF).
Mannings can provide higher temperature heating elements if required which can be used repeatedly at temperatures up to 1200ºC (2192ºF).
Stock Ref. Type Ref. Width (Tail to Tail) Length (of heater body) Volt Power
mm inch mm inch v kw
20230 CP3 75 3.00 670 26.50 60 2.70
20231 CP4 100 4.00 505 20.00 60 2.70
20232 CP6 150 6.00 335 13.25 60 2.70
20233 CP8 205 8.00 250 10.00 60 2.70
20234 CP10 255 10.00 210 8.25 60 2.60
20235 CP12 305 12.00 165 6.50 60 2.70
20236 CP15 380 15.00 145 5.75 60 2.50
20237 CP16 410 16.25 125 5.00 60 2.70
20238 CP21 535 21.00 105 4.25 60 2.50
20239 CP24 610 24.00 85 3.25 60 2.70
20240 CP48 1220 48.00 45 1.75 60 2.70
21230 CP3H 75 3.00 925 36.50 80 3.60
21231 CP4H 100 4.00 690 27.25 80 3.60
21232 CP6H 150 6.00 465 18.25 80 3.60
21233 CP8H 205 8.00 360 14.25 80 3.50
21234 CP10H 255 10.00 295 11.50 80 3.40
21235 CP12H 305 12.00 230 9.00 80 3.60
21236 CP15H 380 15.00 190 7.50 80 3.50
21237 CP17H 430 17.00 165 6.50 80 3.50
21238 CP21H 535 21.00 145 5.75 80 3.30
21239 CP39H 835 33.00 85 3.25 80 3.60
21240 CP40H 1675 66.00 40 1.50 80 3.60
22105 CP24H 610 24.00 330 13.00 220 9.90 | 
